FAQ: TPARTS Real Carbon Fiber Performance Spoiler for Model 3 & Y

Q1. What's the material and manufacturing process of the spoiler?

The spoiler is developed with ATOS 3D scan technique.

It is made of Toray 3K twill and molded by dry carbon manufacturing process.

The production standard is 100% referenced and improved based on Tesla’s original performance spoiler.

 The fitting degree and the pattern uniformity have reached the car standard.

Q2.What's the function of spoiler for tesla model 3 & Y?

In addition to providing a more streamlined appearance, the spoiler can also reduce the wind drag. Based on the test data, the spoiler can reduce drag coefficient by about 2~3%, saving energy and increasing range slightly.

Q3. What's the pattern of the spoiler?

The spoiler pattern uses Toray 3K twill carbon fiber.

Q4. INSTALLATION for TPARTS Real Carbon Fiber Performance Spoiler for Model 3 & Y

1.Clean the trunk where the spoiler will be installed.

2.Pre-locate the spoiler on the trunk before actual installation, move the spoiler to find the symmetry point.

3.Put a locating sticker on the left end of the spoiler.

4.Peel off the adhesive of the spoiler.

5.Install the spoiler based on the locating sticker.

6.Firmly press down on the spoiler for 30 seconds; do not drive fast within 2 hours after installation.

Discover More about TPARTS Real Carbon Fiber Performance Spoiler for Tesla Model 3 & Y Click Here